Make your own free website on Tripod.com

John O's Fiat Insanity

DC Fiats Weber t-shirt

Home
Fiat Panoramas
Cars Lost
The Crushed
Little Cars
124 Sway Bar Fix
124 Tach Fix
124 Ignition Conversion
124 Emissions Plugs
1986 Bertone X1/9 - Black
1986 Bertone X1/9 - 2-Tone
1976 Fiat 128 Wagon
1976 Lancia Scorpion
DC Fiats Logo T-Shirt
DCFIATS.ORG Stickers
DC Fiats August '05 Road Run
DC Fiats Jan '06 Pizza Meet
DC Fiats Catoctin Run '07
April Fools
Contact, Links, and Boilerplate

Application Guide

Banner_Layout_Final_A.jpg

They're showing up all over ...not just on Fiats ...and not just on Italian rides.

First, a little background

Our dcfiats.org text logos are not water-slide decals, so use no water. They are like a self-adhesive sticker, but a little more sophisticated. These are actually professional sign grade, computer cut, self-adhesive vinyl letters.  As you receive them, the vinyl letters are sandwiched between a carrier/transfer paper and a peal-away paper backing. The base vinyl and process colors are UV resistant for exterior signage use and have a "high performance" guarantee for something like 5 years, but usually last way longer. Unlike the cheapy decals/stickers other car clubs produce, ours won't fade in one Summer's worth of driving and will probably outlast the car its on.

Application Directions:

Put a small strip of tape along the top edge of the graphic's top sheet for temporary placement on the glass - the pencil lines on the carrier paper will help with this.

SU.jpg

 

 

Clean the glass or painted surface where you're going apply the vinyl graphic with Windex.

DCOE_Shirt.jpg

 

 

Temporarily tape the vinyl graphic in the desired location on the glass.

Weber_Shirt_White_Final.jpg

 

 

Using the tape as sort of a hinge, flip the graphic up off the glass.

Weber_Shirt_Black_Final.jpg

Carefully peal away the backing paper to expose the adhesive face of the vinyl graphic.

 

 

 

 

Past this point, there is no going back. Once placed against the glass, the graphic cannot be repositioned. It can only be removed with a razor blade or a vinyl adhesive solvent.

Breast_Works_2A.jpg

 

 

Carefully swing the graphic back down, allowing it only to touch the glass at the center.

Banner_Final_Field.jpg

 

 

Working from the center out to avoid capturing any air bubbles, gently smooth it down with your fingers.

Banner_Rigging.jpg

Banner_Back_A.jpg

 

 

 

 

Once the carrier and the vinyl graphic are in place against the glass with no air bubbles, use a hard plastic item such as a magic marker body or a the side of a pen knife to burnish over top of the graphic.

Then slowly peal back the transfer paper at a sharp angle, policing for edges or pieces of the graphic which did not stick properly to the glass.

 

 

 

 

That should be about it. Sounds more complicated than it is.

Any questions or problems feel free to E-MAIL ME.
 
John O.

Created 3 June 2005

Nothing else to see here. Move along.